DC-15s Carbine Mega Remix (Original By JetStorm) 3D Printer Model
The file 'DC-15s Carbine Mega Remix (Original By JetStorm) 3D Printer Model' is (obj,stl) file type, size is 4.7MB.
The file 'DC-15s Carbine Mega Remix (Original By JetStorm) 3D Printer Model' is (obj,stl) file type, size is 4.7MB.
These are all the files you need to upgrade your JetStorm DC-15s clone blaster!
This remix may seem disorganized, but it contains all the parts you need to upgrade the free version of the 3.0 blaster ( https://www.thingiverse.com/thing:1931391 ) to include these upgrades:
In this folder I've included both JetStorm's original 3D files in addition to my own parts. You don't need to print them all! Just pick and choose which pieces will suit your build.
And keep in mind that these parts are essentially just tools and aids to help upgrade your DC-15s. Expect to cut, trim, and drill these pieces as you see fit.
For the aluminum stock, you will need two 3/4 x 1/8 x 15 inch aluminum flat bars. They are pretty easy to find, either at a hardware store or Amazon.
For the working trigger, you'll need to drill a hole for a thin metal bar for the trigger to swivel on. If you want to add an electronics trigger, than you'll most likely need to cut a space in the DC-15s handle to fit the appropriate electronics into.
In order to get all my electronics to fit, I had to hollow out a considerable space for the speaker. If you wish to do the same, I would recommend hiding the speaker behind the grate greeble. You may also need to drill holes for the trigger cables to run through. Other than that, there is plenty of room inside the removable magazine for the sound fx board and battery pack.
If you'd like to see more details, check out these 2 Instagram posts:
And one last note: The original JetStorm parts can all be printed flat without supports, but most of the upgraded parts I made will definitely need to be printed with supports. Take note!
Feel free to reach to me if you have any questions! Happy building.
| Aluminum_Stock_Adapter_a.obj | 219.7KB | |
| Aluminum_Stock_Adapter_b.obj | 206.8KB | |
| dc-15s_Pin.obj | 768.4KB | |
| Ensemble01.stl | 1.1MB | |
| Grate_2.obj | 255.4KB | |
| Grate_THIN.obj | 255.5KB | |
| grippad.obj | 3.1MB | |
| Part_01_a_No_Grip_or_Bolts.obj | 268.5KB | |
| Part_01_a_[001_FREE.stl | 625.8KB | |
| Part_01_b_No_Grip_or_Bolts.obj | 268.6KB | |
| Part_01_b_[002_FREE.stl | 590.0KB | |
| Part_02_a_[003_FREE.stl | 359.6KB | |
| Part_02_b_[004_FREE.stl | 363.5KB | |
| Part_03_a_ForTrigger.obj | 463.4KB | |
| Part_03_a_[005_FREE.stl | 787.8KB | |
| Part_03_b_ForTrigger.obj | 465.9KB | |
| Part_03_b_[006_FREE.stl | 474.4KB | |
| Part_04_a_[007_FREE.stl | 372.1KB | |
| Part_04_b_[008_FREE.stl | 413.9KB | |
| Part_05_a_[009_FREE.stl | 337.8KB | |
| Part_05_b_[010_FREE.stl | 333.0KB | |
| Part_06_[011_FREE.stl | 38.4KB | |
| Part_07_a_[012_FREE.stl | 184.6KB | |
| Part_07_b_[013_FREE.stl | 184.8KB | |
| Part_08_a_[014_FREE.stl | 184.7KB | |
| Part_08_b_[015_FREE.stl | 184.7KB | |
| Part_09_[016_FREE.stl | 135.3KB | |
| Part_10_[017_FREE.stl | 61.0KB | |
| Part_11_[018_FREE.stl | 32.5KB | |
| Part_12_[019_FREE.stl | 349.7KB | |
| Part_13_x4_[020_FREE.stl | 170.7KB | |
| Part_14_V2.obj | 237.8KB | |
| Part_14_[021_FREE.stl | 306.7KB | |
| Part_15_x2_[022_FREE.stl | 147.7KB | |
| Part_16_x2_[023_FREE.stl | 40.7KB | |
| Push_Pin.obj | 38.7KB | |
| ReplacementPart16.stl | 74.0KB | |
| Replacement_Part_16_smaller_base.obj | 177.7KB | |
| Safety_Cap_1.obj | 29.9KB | |
| safety_cap_2.obj | 30.0KB | |
| Stock_Magnet_holder.obj | 16.0KB | |
| Trigger_2.obj | 193.7KB |
