3D printed Logo design of the DBD logo.
The Logo is made out of 3 pieces and several LED stripes that sit between the bottom parts.
I used WS2812b, but you can also use standard 12V single color RGB Stripes.
The pattern at the inside is made for 60led/m LED stripes, 10mm width.
For the LEDs to work you need a small threewire Cable that connects for example to a WLED controller.
The two bottom parts a held together by 16 M3x8 flathead screws and 16 M3 threaded inserts.
| DBD_Logo_Backplate.stl | 189.8KB | |
| DBD_Logo_Bottom.stl | 664.9KB | |
| DBD_Logo_Diffusor.stl | 133.5KB |
