Dayton BST-1 Sim Racing Cockpit Mount 3D Printer Model
The file 'Dayton BST-1 Sim Racing Cockpit Mount 3D Printer Model' is (stl) file type, size is 49.2KB.
The file 'Dayton BST-1 Sim Racing Cockpit Mount 3D Printer Model' is (stl) file type, size is 49.2KB.
Easily mount your Dayton BST-1 Bass Shaker to the Buttkicker mount on your Next Level Racing F-GT, or mount to your aluminum profile cockpit (untested).
This allows you to use the two holes in the under-seat mounts to connect a BST-1 transducer (bass shaker). If you really want to go crazy (like I did) you can print the stencil and drill more holes on either side of the chain mounts to mount a left and right shaker.
Note: I am not a structural engineer. I weigh 175lbs (80kg) and haven't had any structural issues after drilling these holes. Do this at your own risk.
Mounting to an aluminum profile rig is untested but I assume it should work. I'd love some feedback, if not!
You can probably print these with any infill, but to ensure a solid connection between the plastic and the metal I printed at 100% infill.
| BST-1_NLR_Mount.stl | 81.9KB | |
| BST-1_Profile_Mount.stl | 81.7KB | |
| NLR_Drill_Stencil.stl | 26.4KB |
