Dashboard For MST RMX 2.0 RMX 2.5 3D Printer Model
The file 'Dashboard For MST RMX 2.0 RMX 2.5 3D Printer Model' is (stl) file type, size is 152.3KB.
The file 'Dashboard For MST RMX 2.0 RMX 2.5 3D Printer Model' is (stl) file type, size is 152.3KB.
Designed a light-up dashboard for the MST RMX 2.0/2.5. Made this one to fit the A90 supra but can be easily modified for any 1/10 body. Fits 2 5mm LEDs and almost any amazon volt meter.
Made to print with NO SUPPORTS. Notate the Pic here for "Dash Back" print orientation (face down). "Dash Face Plate" print flat to the build plate & "Steering Wheel" prints face down.
I made the Gages from pics online, resizing to 7mm and printing them on white paper. then clear taped them front and back, cut them out in a circle and glued them over the open holes in the dash with leds behind. I added the guages installed the LEDs behind with a dab of hot glue, installed the volt meter with 2 short M2x3 screws and wired the leds and volt meter direct power to the battery with jst Y splitter from a jst i wired off the esc plug.
Dont forget to come like & support my FB Page: Scaler Lab RC
Hope to see you post pics of ur projects using this file. feel free to post pics here and on Scaler Lab RC FB page...
Enjoy...
| Dash_Back.stl | 271.1KB | |
| Dash_Face_Plate.stl | 216.4KB | |
| Steering_Wheel.stl | 102.5KB |
