This is a dash cam mount specifically for the Z-edge camera to Subaru outback rearview mirror mount but I attached the fusion 360 files so it can be modified.
The mirror post will fit a 20mm tube, the swivel mount will fit a 16mm ball and threads are 20mm with 1.5mm pitch. This swivel seems common so it may fit many more than just the Z-edge!
In order for the c-clip to stretch I used ABS, I don't think any other material will be able to recover from the install so you might need to modify that part. ABS is high enough temperature that I am not worried about it melting in the car.
I printed with hatchbox ABS white on a Prusa Mk3 at generic ABS temperatures and 0.2mm layer height. I printed the arm and ball mount separately and used acetone to glue together. I found 0.1mm layer height made the ball socket ooze at the threads a little too much but both work.
| DashCamArm.stl | 346.3KB | |
| DashCamCombined.stl | 912.7KB | |
| DashCamCup.stl | 1.1MB | |
| Dash_Cam_Holder_1.0.f3d | 337.4KB | |
| Dash_Cam_Holder_1.0.step | 485.1KB |
