I rescaled this 1:72 u-boot type VII C from skav56 to 1:48 (138 cm log in total!) and also made it hollow so it can be used for RC.
Joints require M3 threaded rods with some glue.
Warning: the middle section is almost 400mm height, so you need a big sized printer for this project.
Other Warning: more than 160 hours total
| Cunning_Tower.stl | 7.4MB | |
| DAS_BOOT_P1.stl | 13.7MB | |
| DAS_BOOT_P2.stl | 7.9MB | |
| DAS_BOOT_P3+4.stl | 8.7MB | |
| DAS_BOOT_P5.stl | 4.9MB | |
| DAS_BOOT_P5_Top.stl | 2.4MB | |
| DAS_BOOT_P6.stl | 5.6MB | |
| Locker.stl | 71.4KB | |
| STAND_Das_Heck.stl | 258.9KB | |
| STAND_Der_Bug.stl | 229.6KB |
