This is a redesign of the original to cut out the back to allow for straps to be connected and tied around the body and neck. It also is deep enough to house a Battery pack and Circuit board from Radio Shack. The Kit I used was called "The Mesmerizer". It came 6 5mm LEDs (2 red, 2 green, and 2 yellow). I use the 2 red LEDs and bought another from Radio Shack, To light up and oscillate the 3 openings I cut for the lights. I used a glue gun to secure the battery pack and extra wire to run to the 3 red LEDs that were also hot glued in.
| DarthVaderbarcut_tri_4.stl | 1.7MB | |
| Darth_Vader_Chest_plate3.stl | 387.9KB |
