Darth Vader Holding Photo Frame Of Vaders 3D Printer Model
The file 'Darth Vader Holding Photo Frame Of Vaders 3D Printer Model' is (stl) file type, size is 16.3MB.
The file 'Darth Vader Holding Photo Frame Of Vaders 3D Printer Model' is (stl) file type, size is 16.3MB.
Darth Vader Holding Photo Frame of Vaders Hueforge
Get the free color .3MF file version here: https://makerworld.com/en/models/606052
Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 177.35x179mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to Grey
At layer #18 (1.6mm) swap to Silver
At layer #26 (2.24mm) swap to White for the rest.
| vaderframe_Front_177x179_S.stl | 76.2MB |
