Dartboard LED Ring 3D Printer Model
The file 'Dartboard LED Ring 3D Printer Model' is (stl) file type, size is 305.0KB.
The file 'Dartboard LED Ring 3D Printer Model' is (stl) file type, size is 305.0KB.
Update 07.01.2021 upload holders for Grandboard 132 Diameter 490
Update 04.04.2020 new Description
I reconstruct it in fusion 360 because it's easier for me.
I edit the connection between the ring parts to print in two seperate parts so you need no support.
I used 10 mm LED Stripes but it work better with 8 mm (for Version 1 only).
I edit the bracket and used 3 magnets with diameter 6mm x 3mm height to put it to the Dartboard, and I create a bracket with a caple duct.
I used this Magnet 6x3mm.
There are two completly different versions:
V1: the LED stripe is perpendicular to the the board - maindimensions are 15x15
V2: the LED stripe is in an angle of 25° different to V1 - maindimensions are 18x18
Because the magnets loose, i recommend to glue the magents for example i do it with gaffa tape (holder on Dartboard side) - that works perfekt.
The outer diameter of the ring is 660 mm and the high is 125 mm.
The space for the LED stripe is 10 mm.
It's very importaned to print the bracket with cable duct in right direction, so you need no support.
Great work by Klammerson -thx.
| 10tel_without_connector.stl | 51.3KB | |
| Achtel_connector.stl | 104.9KB | |
| Achtel_without_connector.stl | 30.2KB | |
| Bracket_for_bottom_Cable_V1_1.stl | 96.4KB | |
| Bracket_standard_V1_1.stl | 56.1KB | |
| Cablecover_for_bracket.stl | 40.4KB | |
| Granboard_132_dia_490_Bracket_for_bottom_Cable_V1_1.stl | 91.2KB | |
| Granboard_132_dia_490_Bracket_standard_V1_1.stl | 57.6KB | |
| Granboard_132_dia_490_Cablecover_for_bracket.stl | 39.8KB | |
| V2_1_25_Bracket_for_bottom_Cable.stl | 94.4KB | |
| V2_1_25_Bracket_standard.stl | 56.1KB | |
| V2_25_10tel_without_connector.stl | 67.9KB | |
| V2_25_Achtel_connector.stl | 108.3KB | |
| V2_25_Achtel_without_connector.stl | 71.2KB |
