Dart Holder 4 Sets Standing With Drawer 3D Printer Model
The file 'Dart Holder 4 Sets Standing With Drawer 3D Printer Model' is (f3d,stl) file type, size is 3.0MB.
The file 'Dart Holder 4 Sets Standing With Drawer 3D Printer Model' is (f3d,stl) file type, size is 3.0MB.
Darts holder for 4 sets of darts.
I initially edited thing https://www.thingiverse.com/thing:4459821 and removed one set of darts as well as the mounting holes.
I added 2 foots so it can stand easily on a flat surface.
You can find it here: https://www.thingiverse.com/thing:4745360
But as I imported the original model into Fusion the surfaces were bad and i was told that a drawer for the dart tips is missing, so i recreated the stand based on the original design.
The drawer runs very smooth with my print settings and does not touch the ground.
I uploaded also the fusion file for you to modify later if necessary.
Please use 10 % scaling in Cura and turn on the flat back-side of the model to achieve best bed adhesion and use minimal support structures.
The best is to arrange the back to lay flat on the print bed! You need nearly no support!
| Dart-Holder-4x3_standing_with_drawer.f3d | 1.0MB | |
| Dart-Holder-4x3_standing_with_drawer_Drawer_part.stl | 173.7KB | |
| Dart-Holder-4x3_standing_with_drawer_Main_Body.stl | 4.9MB |
