I was installing some SSDs in my Unraid server and noticed that the 2.5in mounts were plastic. I figured it was only a matter of time before someone broke or lost one so I went ahead and measured one out with my calipers.
I did not do a test print. If my measurements are slightly off I have included links to the Tinkercad project files so you can easily modify it. If you improve it, please post a remix so others can benefit.
Work in progress files:
https://www.tinkercad.com/things/29miizFjDMU-darkrock-classico-storage-master-ssd-tray-wip
Merged files:
https://www.tinkercad.com/things/jVoQUxk5oVN-darkrock-classico-storage-master-ssd-tray
| DARKROCK_Classico_Storage_Master_SSD_Tray.stl | 49.8KB |
