DailyEarring#73: Tiny Sliding Train Ring 4cm 3D Printer Model
The file 'DailyEarring#73: Tiny Sliding Train Ring 4cm 3D Printer Model' is (stl,skp) file type, size is 651.81 KB.
The file 'DailyEarring#73: Tiny Sliding Train Ring 4cm 3D Printer Model' is (stl,skp) file type, size is 651.81 KB.
-DailyEarrings & Prologue: thingiverse.com/thing:7120 and blog at www.wap.cc
This is still under constructions, expect the color photos, aditional carts and major tweaking in the future.
The wheels do not turn, it's just a slide rail- but works fine!
We decided to make it without loop and hook the rail to a big closure ring.
//UPDATE 1: Added a color version with a tunnel and pine, which also has a modified rail. Not tested! No STL yet.
//UPDATE 2: Added a new SKP file. The new rail prints with texture, at least the main rails; I added 0.1mm height to the wood bars, should print now (hopefully).
The tree/tunnel version did print, but the tree was disattached. Should work now- but its very big with those extras. I might do a 3cm rail version with smaller train, but not today.
Printing the rail upside-down makes it much smoother and the train runs nicely, so this is the best orientation.
The train itself prints best facing up, as the glider clamp is more rigid due to the layer orientation then.
I made them 0,1mm shorter as on the original now, else they are hard to get on (and it still should be tight enough).
Added some images as well.
| just-the-train-rev3.stl |
| rails-noTexture-but-tested.stl |
| rails-texture-untested.stl |
| train.skp |
| train2.skp |
| train2b.skp |
| train2c.skp |
| train3.skp |
| train4.skp |
| train5.skp |
| train6.skp |
