Daemonbite Extension Adaptor Case 3D Printer Model
The file 'Daemonbite Extension Adaptor Case 3D Printer Model' is (stl) file type, size is 53.4KB.
The file 'Daemonbite Extension Adaptor Case 3D Printer Model' is (stl) file type, size is 53.4KB.
I wanted to print a case for my Daemonbite adaptors. I couldn't find any pre-existing ones that had strain relief should the cord be pulled on. This has a loop for a Ziptie to attach the cables and prevent strain on the solder joints should the cable be pulled. I also wanted one that made the USB cord permanent to have one less cable that would be needed, wouldn't get lost, and would protect the port from damage.
The case was designed to fit these specifc Cable Matters short USB C to USB A cables.
https://www.amazon.ca/dp/B0CLZ85RFY?ref=ppx_yo2ov_dt_b_product_details&th=1
The case is printed with fairly tight clearance that snaps together semi-permanently but can be pried open with a blade.
| Daemonbite_Extension_Adaptor_Case_Bottom.stl | 193.9KB | |
| Daemonbite_Extension_Adaptor_Case_Top.stl | 89.5KB |
