Da Vinci 1.0 PRO Filament Holder Large Spools 3D Printer Model
The file 'Da Vinci 1.0 PRO Filament Holder Large Spools 3D Printer Model' is (3w,stl) file type, size is 27.9 MB.
The file 'Da Vinci 1.0 PRO Filament Holder Large Spools 3D Printer Model' is (3w,stl) file type, size is 27.9 MB.
This is a filament holder for large filament spools like 1.6 and 2.0 kilogram types. It can also be used for smaller spools, like 1kg or 0.6kg if you use a 6mm pin in one of the holes of the filament holder.
UPDATE 01-Feb-2016
Created the XXL model with extra long holder shaft, for even bigger spools.
Let me know what you think of it :-)
The filament holder is designed to be made out of ABS with the Da Vinci 1.0 Pro and it fits directly on the back of the printer. There is no need for printing with support, only be sure to print slowly and use Kapton tape and ABS slurry or hairspray.
Because of the direct placement on the back of the printer, there is also a filament feeder to make space between the filament spool and the back of the printer. Without this feeder, the filament would get stuck between the spool and the back of the printer.
Made it? Show your picture please. Love to get some feedback.
Also, consider sending me a tip as a token of appreciation.
| DaVinci1ProFilamentHolder.3w |
| DaVinci1ProFilamentHolder.stl |
| DaVinci1ProFilamentHolderXXL.stl |
| filamentholder_stick.stl |
