Da Vinci 1.0 Magnetic Door Clip Holder 3D Printer Model
The file 'Da Vinci 1.0 Magnetic Door Clip Holder 3D Printer Model' is (stl) file type, size is 10.1KB.
The file 'Da Vinci 1.0 Magnetic Door Clip Holder 3D Printer Model' is (stl) file type, size is 10.1KB.
Magnet door clip holder for the da vinci 1.0. This clip can be used for locking the door with a magnet.
I recommend to use epoxy for attaching the magnets to the clips.
The top clip should fit instandly without adhesive but for the bottom version I recommend to use some double sided tape on the entire bottom and on the supporting side on the back.
See video:
https://www.youtube.com/watch?v=7hilZkaf-Cc
Dimensions:
Top clip
21mm x 18mm x 15mm
Bottom clip
34.25mm x 18.5mm x 15mm
Rectangle magnet sizes:
15mm x 6mm x 1mm
15mm x 6mm x 3mm
Round magnet sizes:
10mm x 3 mm
Settings:
Layer height: 0.3
Filling density: 10%
Speed: Normal
| da_vinci_10_magnetic_clip_holder_bottom_-_10mm_x_3_mm_round_magnet.stl | 10.6KB | |
| da_vinci_10_magnetic_clip_holder_bottom_-_1_mm_magnet.stl | 5.0KB | |
| da_vinci_10_magnetic_clip_holder_bottom_-_3_mm_magnet.stl | 5.0KB | |
| da_vinci_10_magnetic_clip_holder_combined_-_1mm_magnet.stl | 7.6KB | |
| da_vinci_10_magnetic_clip_holder_combined_-_3mm_magnet.stl | 6.9KB | |
| da_vinci_10_magnetic_clip_holder_top_-_10mm_x_3mm_round_magnet.stl | 8.1KB | |
| da_vinci_10_magnetic_clip_holder_top_-_1mm_magnet.stl | 2.6KB | |
| da_vinci_10_magnetic_clip_holder_top_-_3mm_magnet.stl | 2.6KB |
