D20 Wall Art 3D Printer Model
The file 'D20 Wall Art 3D Printer Model' is (stl,md) file type, size is 16.0MB.
The file 'D20 Wall Art 3D Printer Model' is (stl,md) file type, size is 16.0MB.
v2
Updates on 2023-04-01:
The silver/black/red v2 model was printed in ABS.
v1
Some wall art for all the DnD fans out there, including my daughter.
If you use the provided guides for spacing the end product is about 15" x 15" (38cm x 38cm).
I used Protopasta's Iron-filled Metal Composite PLA
https://www.proto-pasta.com/collections/metal-filled/products/magnetic-iron-pla
and rusted the pieces before sanding and polishing the tops. A light coat of spray polyurethane was added so the rust doesn't come off on fingers or the wall, but I'm honestly not sure if I like the way the coating looks (they were pretty cool looking with the rust showing, while the finish makes it look kind of painted on).
3M Command strips were used for mounting.
Have fun!
| 10.stl | 72.8KB | |
| 12.stl | 82.2KB | |
| 14.stl | 56.7KB | |
| 16.stl | 88.8KB | |
| 18.stl | 113.3KB | |
| 2.stl | 63.2KB | |
| 20.stl | 115.5KB | |
| 4.stl | 36.2KB | |
| 6.stl | 66.8KB | |
| 8.stl | 93.3KB | |
| left-guide.stl | 152.3KB | |
| README.md | 1.7KB | |
| right-guide.stl | 185.0KB | |
| top-guide.stl | 146.3KB | |
| v2-10.stl | 4.0MB | |
| v2-12.stl | 4.5MB | |
| v2-14.stl | 2.8MB | |
| v2-16.stl | 5.1MB | |
| v2-18.stl | 6.6MB | |
| v2-2.stl | 3.2MB | |
| v2-20.stl | 6.6MB | |
| v2-4.stl | 1.7MB | |
| v2-6.stl | 4.3MB | |
| v2-8.stl | 6.1MB | |
| v2-base-1.stl | 210.0KB | |
| v2-base-2.stl | 178.4KB | |
| v2-base-3.stl | 223.7KB | |
| v2-base-4.stl | 198.3KB | |
| v2-base-5.stl | 203.5KB | |
| v2-base-6.stl | 194.7KB | |
| v2-base-clip-x18.stl | 28.4KB | |
| v2-left-guide.stl | 158.6KB | |
| v2-right-guide.stl | 191.3KB | |
| v2-top-guide.stl | 152.5KB |
