D To AA With Square Foot 3D Printer Model
The file 'D To AA With Square Foot 3D Printer Model' is (km,gcode,stl,zip) file type, size is 4.1MB.
The file 'D To AA With Square Foot 3D Printer Model' is (km,gcode,stl,zip) file type, size is 4.1MB.
The original battery adapters would not stick to my belt-printer ( Creality CR-30 ) due to the raft created and since I had a battery holder that was flat and sqaure at the top-end, I simply added a square big foot for the model to be printed on that can stay with the battery holder.
Modification of Bendrexl's modification of Seadevil's D-cell to AA adapter.
I love the brass paper fastener, as it is very inexpensive and works very well! ( these can be found in office supply stores such as Staples, at least here in Sweden )
Print Settings
Printer:
Creality CR-30 ( belt printer )
Slicer for what was printed in the photo:
Kiri Moto, see below screenshots for the settings used.
| CR30_PLA.km | 2.3KB | |
| D-to-AA-with-hole-square.gcode | 6.9MB | |
| D-to-AA-with-square-creatlity_CR-30_PLA.gcode | 6.9MB | |
| D_to_AA_with_hole_and_square_foot_for_belt_printer.stl | 344.4KB | |
| D_to_AA_with_square_foot_for_belt_printer.stl | 335.3KB | |
| D_to_AA_with_square_foot_for_belt_printer.zip | 59.6KB |
