D-Series XLR Blank For 22mm Rack Panel Push Button 3D Printer Model
The file 'D-Series XLR Blank For 22mm Rack Panel Push Button 3D Printer Model' is (stl,gcode) file type, size is 375.4KB.
The file 'D-Series XLR Blank For 22mm Rack Panel Push Button 3D Printer Model' is (stl,gcode) file type, size is 375.4KB.
XLR blank to house a latching push button stitch inside a D-Series XLR cutout.
The blank is designed to be attached to a 1.2mm thick metal panel and supports a switch requiring a 22mm cutout. - The 1.2mm raised section surrounding the blank has been added to help centre the blank inside the cutout but is not critical to its structure.
When printing I used 75% infill to ensure this was as solid as possible to put up with long-term use.
When fitted this part cannot be seen from the exterior of the rack.
Use nuts and bolts instead of self-tapping screws to mount this to your panel.
Button used: https://www.ebay.co.uk/itm/395129967637 (22mm white ring)
| D-Series_22mm_Button_Cutout.stl | 421.9KB | |
| xlr_button_22mm.gcode | 729.4KB |
