CZ 515 22LR – 15 Round Waffle Magazine (452 / 453 / 455 / 457 / 512) 3D Printer Model

Author: @
License: CC BY-SA
File formats: stl
Download type: zip
Size:1.1MB

The file 'CZ 515 22LR – 15 Round Waffle Magazine (452 / 453 / 455 / 457 / 512) 3D Printer Model' is (stl) file type, size is 1.1MB.

Summary

CZ 515 22LR - 15 round magazine - Waffle Mag!

Fully DIY 15 round magazine.
Tested and working flawlessly with my CZ 515 Tactical.

Should also work with:

  • CZ452, CZ453, CZ455, CZ457 & CZ512
  • Brno Models 1, 2 & 5
  • Cogswell & Harrison Certus
  • Norinco JW15 & JW25
  • Lithgow Crossover LA101
    (May have to change/file/alter the magazine follower - don't have any of these rifles, so can't test)

0.8mm diameter spring wire, wound around the printable spring jig works well.
Wind it around into the grooves, then use pliers/multi-grips and squeeze each coil flat against the sides of the jig.
Once flattened, wind back off the jig.
With your fingers, pinch each coil and straighten the spring as best as possible (it doesn't need to be perfect)
Anneal the spring in your oven - 260 degrees Celsius or 500 degrees Fahrenheit for approx 2 hours (the spring will change colour)

PLA+ works well.
Testing carbon filled nylon (PA6-CF) in the near future.

CZ_515_22LR_15_Round_Magazine_Spring_Jig.stl 2.5MB
CZ_515_22LR_15_Round_Waffle_Magazine_Base.stl 46.0KB
CZ_515_22LR_15_Round_Waffle_Magazine_Body.stl 788.3KB
CZ_515_22LR_Magazine_Base_Plate_Clip.stl 47.2KB
CZ_515_22LR_Magazine_Follower.stl 83.8KB
CZ_515_22LR_Magazine_Follower_2.stl 76.7KB
CZ_515_22LR_Magazine_Follower_3.stl 72.1KB