CZ 515 22LR – 15 Round Magazine (452 / 453 / 455 / 457 / 512) 3D Printer Model
The file 'CZ 515 22LR – 15 Round Magazine (452 / 453 / 455 / 457 / 512) 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'CZ 515 22LR – 15 Round Magazine (452 / 453 / 455 / 457 / 512) 3D Printer Model' is (stl) file type, size is 1.1MB.
CZ 512 22LR - 15 round magazine
Fully DIY 15 round magazine.
Tested and working flawlessly with my CZ 515 Tactical.
Should also work with:
0.8mm diameter spring wire, wound around the printable spring jig works well.
Wind it around into the grooves, then use pliers/multi-grips and squeeze each coil flat against the sides of the jig.
Once flattened, wind back off the jig.
With your fingers, pinch each coil and straighten the spring as best as possible (it doesn't need to be perfect)
Anneal the spring in your oven - 260 degrees Celsius or 500 degrees Fahrenheit for approx 2 hours (the spring will change colour)
PLA+ works well.
Testing carbon filled nylon (PA6-CF) in the near future.
| CZ_515_22LR_15_Round_Magazine_Base_Plate.stl | 50.0KB | |
| CZ_515_22LR_15_Round_Magazine_Body.stl | 639.4KB | |
| CZ_515_22LR_15_Round_Magazine_Spring_Jig.stl | 2.5MB | |
| CZ_515_22LR_Magazine_Base_Plate_Clip.stl | 47.2KB | |
| CZ_515_22LR_Magazine_Follower.stl | 83.8KB | |
| CZ_515_22LR_Magazine_Follower_2.stl | 76.7KB | |
| CZ_515_22LR_Magazine_Follower_3.stl | 72.1KB |
