CZ 2075 Rami Mag Sleeve – 14 & 16 Rd 3D Printer Model
The file 'CZ 2075 Rami Mag Sleeve – 14 & 16 Rd 3D Printer Model' is (stl,stp) file type, size is 553.2KB.
The file 'CZ 2075 Rami Mag Sleeve – 14 & 16 Rd 3D Printer Model' is (stl,stp) file type, size is 553.2KB.
I wanted some additional range magazines for my Rami. I knew that the CZ 75 magazines fit in the Rami magwell, but I couldn't find any appropriately sized mag sleeves. Technically you can use them without a sleeve, but you risk bending the ejector pin from over-inserting if you slam in in too hard. So, I just copied the OEM spacer that comes on the 14 rd Rami mags. I found 16 rd Mec-Gar mags at Lanbos for under $18 each, vs Rami 14 rd mags around $50 each. So here we are. I created a 14 rd sleeve and a 16 rd mag sleeve. I have test fit them with the 16 rd Mec-Gar mags with the steel base plate as shown in the pics. Including STEP files in case anyone needs to adjust for other mags.
| cz_2075_rami_mag_sleeve_14.stl | 262.5KB | |
| cz_2075_rami_mag_sleeve_14.stp | 112.9KB | |
| cz_2075_rami_mag_sleeve_16.stl | 1.0MB | |
| cz_2075_rami_mag_sleeve_16.stp | 212.0KB |
