CZ 175 – 1939 1/10 3D Printer Model
The file 'CZ 175 – 1939 1/10 3D Printer Model' is (STL,stl) file type, size is 117.8MB.
The file 'CZ 175 – 1939 1/10 3D Printer Model' is (STL,stl) file type, size is 117.8MB.
Československý motocykl vyráběný v letech 1935-1946. Motorka měla tradiční černé barvy,
verze Special se lišila chromovanými detaily a ráfky. Pozdější verze měly nožní řazení,
z počátku výroby se dodávalo řazení ruční vedle nádrže.
Czechoslovak motorcycle manufactured in the years 1935-1946. The motorcycle had a
traditional black color, the Special version differed in chrome details and rims. Later versions
had a foot shift, from the beginning of production, a manual shift was supplied next to the
tank.
Instruction:
Model is scale 1:10, designed for DLP/SLA printer. FDM don't work..
Manul PDF: https://mochr.cz/portfolio/cz-175-1937/
Don't forget click TIP DESIGNER---> Thanks :)
| battery.STL | 265.0KB | |
| box.STL | 780.6KB | |
| brake_pedal.STL | 672.5KB | |
| carburetor.STL | 3.4MB | |
| carrier.STL | 503.5KB | |
| chain.stl | 16.9MB | |
| chain_cover.STL | 511.2KB | |
| engine1.STL | 653.3KB | |
| engine2.STL | 1.1MB | |
| engine3.STL | 834.2KB | |
| exhaust_-_connector.STL | 226.0KB | |
| exhaust_-_elbow.STL | 1.6MB | |
| exhaust_-_end_part.STL | 516.6KB | |
| frame.STL | 2.0MB | |
| front_brake_lever.STL | 567.8KB | |
| front_fender.STL | 2.2MB | |
| front_fork.STL | 1.8MB | |
| front_light.STL | 1.5MB | |
| front_spring.STL | 18.9MB | |
| front_wheel_.STL | 96.7MB | |
| fuel_pipe.STL | 5.0MB | |
| fuel_tank.STL | 2.0MB | |
| handlebar-lower_part.STL | 1.4MB | |
| handlebar-upper_part.STL | 2.3MB | |
| handlebars.STL | 1.6MB | |
| horn.STL | 720.7KB | |
| lens.STL | 705.8KB | |
| pegs.stl | 1.1MB | |
| rear_brake_lever.STL | 114.4KB | |
| rear_fender.STL | 1.6MB | |
| rear_wheel.STL | 96.7MB | |
| seat-frame.STL | 2.4MB | |
| seat.STL | 1.6MB | |
| shift_mechanics_-_foot.STL | 1.0MB | |
| shift_mechanics_-_hand.STL | 855.0KB | |
| sign.STL | 678.0KB | |
| spring_seat.STL | 18.7MB | |
| stand.stl | 889.5KB | |
| starting_lever.STL | 776.0KB | |
| stud.STL | 997.1KB | |
| tyre.STL | 5.5MB |
