This is a working printable midcpap for your cyma or marui springer/gas 3-shot shotgun.
when printing be sure to keep 5.6mm height between top face and bottom of bb path, otherwise it can't work properly. This applies to ANY printable midcap you'll come across by the way.
| 1_half.stl | 91.5KB | |
| 2_half.stl | 91.8KB | |
| follower_m2.4.stl | 296.3KB | |
| shell_body.stl | 165.9KB | |
| tooth.stl | 20.4KB |
