It's a fully functional cylinder lock that offers 5⁴ (=625) different combinations.
You will need 4 springs from a ball pen (diameter = 4 mm, Length > 19 mm, tolerance is quite high and parametric) or let gravity do the its job for a first test.
To create a custom lock, open the .f3d-file in Fusion 360, go to "change Parameters" and set PIN1STUFE to PIN4STUFE an a value between 1 and 5. It will adjust the pins and the key accordingly.
Also see https://youtu.be/lX2YUn6JloE
| LockComplete.stl | 1.2MB | |
| LockCompletePrusaSlicer.3mf | 283.5KB | |
| Lock_Lock_v4_Schloss_1_Cylinder_.stl | 468.8KB | |
| Lock_Lock_v4_Schloss_2_Case.stl | 196.0KB | |
| Lock_Lock_v4_Schloss_3_PinRow1_1.stl | 24.2KB | |
| Lock_Lock_v4_Schloss_3_PinRow1_2.stl | 24.1KB | |
| Lock_Lock_v4_Schloss_3_PinRow1_3.stl | 24.1KB | |
| Lock_Lock_v4_Schloss_3_PinRow1_4.stl | 24.1KB | |
| Lock_Lock_v4_Schloss_4_PinRow2_1.stl | 1.1KB | |
| Lock_Lock_v4_Schloss_4_PinRow2_2.stl | 1.1KB | |
| Lock_Lock_v4_Schloss_4_PinRow2_3.stl | 1.1KB | |
| Lock_Lock_v4_Schloss_4_PinRow2_4.stl | 1.1KB | |
| Lock_Lock_v4_Schloss_5_PinFixation.stl | 98.1KB | |
| Lock_Lock_v4_Schloss_5_PinFixationTop.stl | 2.2KB | |
| Lock_Lock_v4_Schloss_6_key.stl | 109.8KB | |
| Lock_Lock_v4_Schloss_7_Lever.stl | 30.6KB | |
| Lock_Lock_v4_Schloss_8_Nut.stl | 239.2KB | |
| Lock_v4.f3d | 643.8KB |
