I bought a CYD display from Amazon and didn't realize that it was 2.4 inches and not the 2.8 inch model that everyone else seems to have.
Mine has 67.4mm and 36.2mm between the center of the mounting holes in the circuit board.
So I will have to make my own case, but in the meantime, I wanted something to hold the unit so that I could plug it in and start working with it safely.
This 'bumper' is what I made.
It takes 2mm screws. I think 6mm long. You can use four or two screws.
I read somewhere that someone else screwed the CYD down too tight and cracked the screen. I don't think you could do that with this bumper as it is a little flimsy. Which is good.
| CYD_2p4.stl | 282.3KB |
