Cyclone Dust Seperator 3D Printer Model
The file 'Cyclone Dust Seperator 3D Printer Model' is (stl) file type, size is 2.8MB.
The file 'Cyclone Dust Seperator 3D Printer Model' is (stl) file type, size is 2.8MB.
This is a direct copy of LizzyDesign's Cyclone Dust Separator, except the large vortex filter has been broken into 3 smaller pieces so it would fit on a small bed sized 3D Printer like my Prusa Mendel Iteration 2. (Aprox 196mm wide X 196mm Depth X 90mm High).
The total Print weight for me was about 650 grams with a 15% infill.
To use this Cyclone Dust Collector you will need a Shop Vac, a spare vacuum hose, a bucket with lid, and 5 @ 6M Bolts with nuts and washers. Also you will need some type of glue to glue the Sections together. I used a CA glue and accelerator/kicker to glue the 3 sections together. It is a very simple build.
Please watch my Video on how I made it.
https://youtu.be/fe3hI5IohxM
| Inset_dust_tube.stl | 8.0MB | |
| Section_1.stl | 2.6MB | |
| Section_2.stl | 500.4KB | |
| Section_3.stl | 510.1KB |
