Cyclone Dust Separator / Vortex Filter 3D Printer Model
The file 'Cyclone Dust Separator / Vortex Filter 3D Printer Model' is (stl,stp) file type, size is 3.1MB.
The file 'Cyclone Dust Separator / Vortex Filter 3D Printer Model' is (stl,stp) file type, size is 3.1MB.
Although this cyclone filter has been designed from scratch the initial idea came from a separator I saw here on thingiverse made by jaykoehler. I needed a version which could withstand a lot of abuse for onsite building work. It is optimized for a 5 layer perimeter and can be securely fastened with 6mm nuts and bolts. Prints perfect without supports.
It works really well. I designed it to the maximum size my printer could print. Inside I designed a spiral start so that dust is immediately sent in the right direction. I also designed screw in connectors since we use this filter with a lot of different vacuum cleaners with different diameter hoses. So we just need to print a screw connector with the right diameter and don't need to reprint the complete filter. I will put a source file of this connector online so you can adapt it to your needs. Alternatively you can download a conical connector designed by doobedoobedo which will fit various size hoses. http://www.thingiverse.com/thing:2083622
| Cyclovac_with_thread.stl | 14.5MB | |
| Inset_dust_tube.stl | 8.0MB | |
| Inset_dust_tube.stp | 141.5KB |
