Cyclo Blocker And Cheesplate Spacer 3D Printer Model
The file 'Cyclo Blocker And Cheesplate Spacer 3D Printer Model' is (stl) file type, size is 109.7KB.
The file 'Cyclo Blocker And Cheesplate Spacer 3D Printer Model' is (stl) file type, size is 109.7KB.
First attempt to design a simple 3D printed bracket to lock the Cyclo when not powered.
V1 is a side bracket holding both rings, the internal 12mm tube and the external 16mm tube. Only one of V1 is very weak, maybe two V1... This was my first idea, not really working, but posting anyway as maybe is usefool for someone to design a better bracket.
V2 is a piece that goes in the middle of the tubes of the internal and the external.
V2.2 is the same but 1mm thicker.
Found that using two V2 one in the normal position and the other inside the first one from the top, its super rigid.
I also uploaded a simple 16mm rod clip 19mm long to use as a spacer at the cheesplate so this don't move.
| Cheesplate_spacer.stl | 108.9KB | |
| Cyclo_Block_V1.stl | 93.4KB | |
| Cyclo_Block_V2.2.stl | 118.8KB | |
| Cyclo_Block_V2.stl | 117.9KB |
