Cycliq Fly 12 Flat Mount 3D Printer Model
The file 'Cycliq Fly 12 Flat Mount 3D Printer Model' is (stl) file type, size is 181.9KB.
The file 'Cycliq Fly 12 Flat Mount 3D Printer Model' is (stl) file type, size is 181.9KB.
Due to having aero handlebars, I've repeatedly had issues mounting my Cycliq Fly 12 front camera and light. I'm not racing anymore but am comfortable with my setup so I didn't want to buy anything new.
I tried the clip design from toysmith2029 (https://www.thingiverse.com/thing:3918927) but the clip wasn't compatible with the bars.
As such I've taken the mount plate from that design and placed it on a simple flat base with room for cable ties. It's a simple design, but it works perfectly for me so I thought I'd share it.
Simply take the mount and cable-tie it to the bottom of your handlebars to give you a plate to attach the fly 12 onto.
Thanks to toysmith2029 for designing the mount.
Printed with a 0.4mm nozzle and 0.2mm layers in ABS. PETG or tough PLA is also likely to be suitable. Use the safety wire supplied with the camera just to be safe.
| fly12Mount_v5.stl | 618.1KB |
