This is a trailer I designed to fit wov's Cybertruck. Just print the original Cybertruck and attach the hitch I designed with superglue. Attach the wheels with the same hardware used by the original Cybertruck (listed below), and the windshield, which should be a friction fit but superglue never hurts. There are two options for printing the trailer. Option 1 is to print the "Cybertrailer Built In Axle" upright with supports (preferably tree supports). Option 2 is to print the "Cybertrailer Separate Axle" laying flat with supports and printing "Cybertrailer Axle" separately. The axle can be simply friction fit but superglue is recommended. Print the trailer, axle, hitch and windshield in the orientation given in Cura. Print the wheels and tires laying flat, making sure the sidewall details on the tires are facing upwards. Also try printing Iwatobi's Cyberquad shown in pictures (thing #4071079, Thingiverse wouldn't let me remix 2 things at once) to haul on your new trailer!
Parts needed:
2x brass insert M3 ruthex
2x M3x14 (wheels)
2x polyamide washer (wheels)
Superglue (Hitch, windshield and Axle)
Loctite (Wheel screws)
Update 5/6/2021: Added Cybertrailer with built in axle STL
| AT_tyre_left.stl | 3.1MB | |
| AT_tyre_right.stl | 3.1MB | |
| black_rim_inside.stl | 86.7KB | |
| black_rim_outside.stl | 118.6KB | |
| Cybertrailer_Axle.STL | 338.6KB | |
| Cybertrailer_Built_in_Axle.STL | 409.9KB | |
| Cybertrailer_Separate_Axle.STL | 130.9KB | |
| Cybertrailer_Wind_Shield.STL | 21.4KB | |
| Cybertruck_Hitch.STL | 11.9KB | |
| tpu_tyre_left.stl | 2.8MB | |
| tpu_tyre_right.stl | 2.8MB |
