Cyberpunk 2077 Tamayura Pistol 3D Printer Model
The file 'Cyberpunk 2077 Tamayura Pistol 3D Printer Model' is (stl) file type, size is 2.4MB.
The file 'Cyberpunk 2077 Tamayura Pistol 3D Printer Model' is (stl) file type, size is 2.4MB.
This is a prop version of the Tamayura pistol from Cyberpunk 2077, recreated from ingame screenshots. The slide is designed to move back and forth, but the trigger does not move.
This feels a little small for me at 100%. You can see in the images above that it is smaller in my hands than in the character's. 110-115% scale may be more appropriate if you have larger hands, although you will need to find a different slide rail spring.
There are two versions of the slide rail. If you want to embed a spring, you can print the "with spring" version, as well as the slide runner.
This is designed to use a 23/64" x 1-3/8" Compression Spring. It's all i had on hand when building.
| barrel_ring_orange.stl | 146.2KB | |
| grip.stl | 2.2MB | |
| magazine.stl | 574.0KB | |
| nose.stl | 1.1MB | |
| nose_decoration.stl | 55.2KB | |
| optional_slide_runner.stl | 47.0KB | |
| rear_sight.stl | 91.8KB | |
| slide.stl | 1.7MB | |
| slide_rail_no_spring.stl | 801.1KB | |
| slide_rail_with_spring.stl | 832.7KB | |
| slide_retainer.stl | 16.7KB | |
| trigger.stl | 196.3KB | |
| trigger_pin.stl | 69.2KB | |
| underbarrel.stl | 1.0MB |
