Overture Revolver from Cyberpunk 2077 with double action mechanism.
Really liked the design and decided to make it and give it a double action mechanism to make it more fun.
The pictures contain the necessary bolts, nuts and springs you will need to make this. I didn't have too many springs to choose from so I used 2 in same spots to increase the strength. Make sure to print the mechanism parts with 0.4mm or smaller nozzle, at 0.1mm layer height and at slow speed to make sure they are accurate. For assembly follow the images with instructions in the Post-Printing section.
Happy printing :)
| Barrel.stl | 110.2MB | |
| Body.stl | 101.0MB | |
| Cover.stl | 13.5MB | |
| Cylinder.stl | 23.6MB | |
| CylinderGear.stl | 330.0KB | |
| CylinderLock.stl | 350.1KB | |
| CylinderRotator.stl | 203.7KB | |
| CylinderSwitch.stl | 1.5MB | |
| DoubleActionFlap.stl | 391.6KB | |
| Hammer.stl | 20.4MB | |
| HammerSpringPin.stl | 237.6KB | |
| Handle.stl | 64.4MB | |
| Lever.stl | 28.9MB | |
| LeverAxis.stl | 17.2MB | |
| LeverAxisHalf1.stl | 7.4MB | |
| LeverAxisHalf2.stl | 7.5MB | |
| LeverPin.stl | 5.5MB | |
| Safety.stl | 5.1MB | |
| Trigger.stl | 1.8MB | |
| TriggerGuard.stl | 14.5MB | |
| TriggerGuardPin.stl | 275.1KB | |
| TriggerPin.stl | 275.1KB |
