This thing is a handle for the inside edge of the doors of the Tesla Cybertruck to help prevent fingerprints from people touching the outside of the door while closing it. There is a left and right handle and they work for the front and rear doors. These handles are easier to see and use and stay bonded to the door better than other designs I've tried, as the force applied is in the same direction as the adhesive, rather than a sheering force. Once installed, the handles do not interfere with door operation.
Printing:
Orient model with large flat side on bed to avoid supports. Also, the doors can get pretty hot in direct sun, so I would recommend using ABS filament, for heat resistance.
Mounting Adhesive:
3M Auto Super Strength Molding Tape
The mounting tape should be applied to the slanted edge of the handle. The handle should be mounted on the inside face of outside-facing panel, as far in as it'll go. See photos as a guide.
| CyberHandle_Left.stl | 36.1KB | |
| CyberHandle_Right.stl | 36.1KB |
