CyberBase Display System For Transformers – Core Set 3D Printer Model
The file 'CyberBase Display System For Transformers – Core Set 3D Printer Model' is (stl) file type, size is 5.5MB.
The file 'CyberBase Display System For Transformers – Core Set 3D Printer Model' is (stl) file type, size is 5.5MB.
This CyberBase Core Set is an upgraded version of the much earlier Display Hanger, and has been re-designed to give the possibility of further expansion and compatibility. For this set of files, there will be the following parts:
• Tiles A-D (4 Variants)
• Floor 2x2
• Floor 2x2 with Peg Holes
• Peg Filler for Floor Holes
• Pillar - 10cm and 20cm height
• Wall - 10cm and 20cm height
As an option, all the floor pieces come with variants which will allow you to glue in cylindrical magnets of 5mm (diameter) x 3mm so that the pieces will be able to snap fit together.
Individual pieces have been sized such that they will fix most 3d printers and 3d print with very minimal support. Since you can print as many pieces as you like, the CyberBase pieces you have can grow along with your collection ;)
Love to see photos of these in use, so enjoy and happy 3d printing them!
===
This model is not to be uploaded or sold in any form and is intended for personal use only.
Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http:/www.FunbieStudios.com)
Support us on Patreon - https://www.patreon.com/FunbieStudios
| CBS_Floor-2x2.stl | 2.9MB | |
| CBS_Floor-2x2Magnet.stl | 4.2MB | |
| CBS_Floor-2x2_Peg.stl | 2.9MB | |
| CBS_Floor-2x2_PegMagnet.stl | 4.2MB | |
| CBS_Pillar_10cm.stl | 184.3KB | |
| CBS_Pillar_20cm.stl | 238.9KB | |
| CBS_Plug.stl | 1.8KB | |
| CBS_TileA.stl | 775.7KB | |
| CBS_TileAMagnet.stl | 1.3MB | |
| CBS_TileB.stl | 745.3KB | |
| CBS_TileBMagnet.stl | 1.3MB | |
| CBS_TileC.stl | 697.8KB | |
| CBS_TileCMagnet.stl | 1.2MB | |
| CBS_TileD.stl | 706.4KB | |
| CBS_TileDMagnet.stl | 1.2MB | |
| CBS_Wall_10cm.stl | 2.2MB | |
| CBS_Wall_20cm.stl | 4.5MB |
