CW Superion Upgrades 3D Printer Model
The file 'CW Superion Upgrades 3D Printer Model' is (stl) file type, size is 11.2MB.
The file 'CW Superion Upgrades 3D Printer Model' is (stl) file type, size is 11.2MB.
Hands, Feet and Leg extensions for CW Superion. Requires a well tuned printer as each component prints as one assembly. Will also require a little force/manipulation to break the contact points on the joints. The Angle pivot joint will require a bit more force to free up this is to ensure this joint retains a decent a mount of friction. The pegs for the feet will require pressing into place on the feet. They are printed this way to ensure structural strength only the peg length. Will require supports touching build plate.
| CW_Superion_LFoot_Ver1.stl | 5.6MB | |
| CW_Superion_LFoot_Ver2.stl | 3.3MB | |
| CW_Superion_LHand.stl | 4.5MB | |
| CW_Superion_LThigh.stl | 956.7KB | |
| CW_Superion_RFoot_Ver1.stl | 5.6MB | |
| CW_Superion_RFoot_Ver2.stl | 3.3MB | |
| CW_Superion_RHand.stl | 4.5MB | |
| CW_Superion_RThigh.stl | 956.5KB |
