Cute Tyranitar Chibi Pokemon Fridge Magnet/Keychain 3D Printer Model Free Download

Author: @SuSh11

File formats: stl

Download type: zip

Size:384.5KB

The file 'Cute Tyranitar Chibi Pokemon Fridge Magnet/Keychain 3D Printer Model' is (stl) file type, size is 384.5KB.

Description Files (3)

Summary

Can be printed as a keychain or fridge magnet. The fridge magnet is designed to fit two 5 x 2 magnets (Link).

🖨️ Print Settings/Instructions:
- Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm.
- Print Tyranitar_red.stl using Red. This piece should snap on but if not, you might have to make them a bit smaller/bigger and glue them in. Note: These parts are extremely small so care needs to be taken when removing from the build plate to ensure they don't fly off everywhere.
🌈 Color Changes (Tyranitar_body.stl):
- Start with White
- At layer #34 (3.50 mm), change to Green. If you want a darker shade of green, you can change at layer #33 or even #32.
- At layer #35 (3.60 mm), change to Black.
- At layer #38 (3.90 mm), change to Grey for the rest.