Cute Tiger ( Hueforge) 3D Printer Model
The file 'Cute Tiger ( Hueforge) 3D Printer Model' is (stl) file type, size is 27.7MB.
The file 'Cute Tiger ( Hueforge) 3D Printer Model' is (stl) file type, size is 27.7MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Overture Matte White Transmission Distance: 3.7
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #9 (0.8mm) swap to Sunrise Orange
At layer #17 (1.44mm) swap to White for the rest.
| Cute_Tiger_Front_200x200.stl | 95.9MB |
