► ►Get access to all our other amazing 3d print STL and 3MF files on our SEREV3d Patreon:
-dozens of original, high quality premium stl and 3mf files with provided print settings
-painting and post processing recommendations
-multiple different versions of the models, depending on your needs
-and we also take personal requests from our members of what design they want!

• For the rights to sell the 3d prints of our designs, become a paid member on our patreon: https://www.patreon.com/SEREV3d

► ►Join our Serev3D Authorized Sellers List

More info on our Serev3D website about getting our models with a discount price, commercial license, and how to get on the Authorized Sellers' List. You can take a look at the Serev3D community prints there too: https://serev3d.com/

Printed on:
-Bambu P1S

Recommended filaments:
If you want to paint on:
-Bambu Matte PLA

If you plan to print without painting:
-Bambu Dual Silk PLA or
-Bambu Gradient PLA

Print difficulty level: Beginner

Print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in the 3mf file)

-Layer height: 0.16-0.2mm (within this range it works well, the lower the layer height, the less you can see the layer lines)

-Wall loops: 2

-Infill: 10%, Gyroid

-Support: a minimal amount of support is needed under the two arms, you can activate Auto Tree(Organic) supports with a 30 degree threshold angle, TopZ distance 0.24, BottomZ distance 0.2

Estimated print time: 1.5h-2h

Painting and & post process instructions:

1. Prep: Use white filament and sand the model lightly to smooth any layer lines (recommended to use wood filler/or plastic putty, and primer spray with a little bit of sanding to minimize layer lines visibility)

2. Base Coat: Spray the entire model with a light ivory or cream primer as a base coat. This gives the model an even starting color and helps subsequent paint layers adhere better.

3. Shading and Depth: Use a wash technique with diluted brown, reddish, or orange acrylic paint. Apply the wash into all the crevices (like between the wax drips) to create shadows. Wipe off any excess from raised areas with a paper towel or cloth. Airbrush or hand-paint gentle red and orange tones around the lower portions of the model to create the melted wax effect, blending from dark at the bottom to lighter at the top.

4. Highlighting Details: Lightly dry-brush off-white or very light beige paint on raised areas, like the edges of the wax drips. This adds dimension and makes the model look more realistic and "organic."

5. Sealant: Once the paint is dry, apply a matte or satin clear coat to protect the paint and give the body a soft wax-like texture.

For the eyes to look nice, shiny and alive: Paint it using glossy acrylic paint or black enamel paint. Apply at least two coats to get a rich, solid black finish. To get the shiny effect, after the black paint has dried, apply a layer of glossy clear varnish or resin over the eyes. This will give the eyes a reflective, glassy appearance.

We're looking forward to see your awesome makes of our designs!
If you want us to give shoutouts and reposts of your makes on social media, don't forget to tag us @serev3d and use #serev3d on your posts, so we can find it and re-share it on our socials, giving you proper credit!

Also, a few good places where you can share your makes and get a good exposure:

• 3d Printing for Beginners and Pros
• 3D Printing ⚙️
• Reddit 3D Printing community

Check out all our other amazing designs on our patreon: https://www.patreon.com/SEREV3d

• New models being released every 2-3 days
• If you wish to sell the 3d prints you make from our designs, get your Serev3d Authorized Seller Badge upon joining our paid Patreon membership we'll place your contacts of your store on our Authorized Sellers' List