Designed to fit 10 x 2 magnets which can be found on Amazon.
- 🖨️ Print Settings/Instructions:
- Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm.
- Print Kirlia_Red.stl using Red. This should snap on but if not, you might have to make them a bit smaller and glue them in. Note: These parts are extremely small so care needs to be taken when removing from the build plate to ensure they don't fly off everywhere.
- 🌈 Color Changes (Kirlia_Body.stl):
- Start with White
- At layer #30 (3.10 mm), change to Green.
- At layer #35 (3.60 mm), change to Black for the rest.
![Quantum Slime! And Other Variations [Crystal, Boom, Rock And Honey] 3D Printer Model](https://res.3axis.co/5ae03b44-0ea7-4d3a-91dd-89f79c57ae6d/images/7b95f40c-3755-4c77-b0d2-a22229d34c91_thumb.jpg)
