Roughly 110 mm wide, 90 mm deep, and 120 mm tall. Designed to use the pump from a Softsoap brand dispenser.
I recommend printing with PETG to have a better chance of it being water tight. I printed mine in PLA, but I coated the inside with a food safe resin.
Don't let the slicer "fix" the .stl file. It will fill-in the hollow inside.
Turn off automatic support generation. Use paint-on supports only under his snout. And turn on "support on build plate only." This is a perfect case for using organic supports, if you have them.
Consider turning on random seam position.
Special thank you to robintwhite for the model my "cute hippo" was based on (https://www.thingiverse.com/thing:5182447).
I used Blender to modify the hippo model, and FreeCad to design the bottle.
| hippo_soap_dispenser.3mf | 4.5MB | |
| hippo_soap_dispenser.stl | 14.4MB | |
| hippo_soap_dispenser_0.4n_0.2mm_PETG_MK4IS_4h30m.bgcode | 9.5MB |
