Cute Cartoon Easter Chick No. 4 3D Printer Model
The file 'Cute Cartoon Easter Chick No. 4 3D Printer Model' is (stl) file type, size is 30.0MB.
The file 'Cute Cartoon Easter Chick No. 4 3D Printer Model' is (stl) file type, size is 30.0MB.
This is the third little Chick for your Easter or Garden decoration. It belongs to whole Set of different Chicks
This cute little Chick is about 12 cm / 4.7 Inch in size. It is part of a whole series of chicks that you can use for your Easter/Spring decoration.
This Model is split in an Upper and Lower Part, this makes it easer to paint the Chick and saves some Support Material
Here are the Models which are released so far:
Chick 1 ( Standing):
https://www.thingiverse.com/thing:5952710
Chick 2 (Sitting):
https://www.thingiverse.com/thing:5954769
Chick 3 (With Egg):
https://www.thingiverse.com/thing:5956318
Chick 4 (Waving):
https://www.thingiverse.com/thing:5957757
It is easy to print, especially if you use the new Organic/Tree Supports.
If you want to use it outdoors, i would recommend to print it with ABS, which works great for this Model.
For the Painting, i used an Airbrush for the yellow Base colour, but you could also use a Brush and acrylics, or choose a yellow Filament. Then I use a thin brush to paint the Eyes, Feet and spout.
Feel free to share your Prints with me, Iam always curious how your Chicks will look like!
If you appreciate my work, please consider to give a Like to this Model.
And If You are interested of my other Projects, feel free to visit me under https://www.instagram.com/tobi_franke/
| ChickWaveLeft.stl | 26.0MB | |
| ChickWaveRight.stl | 26.0MB |
