Customizable Universal Phone & Tablet Stand With Keychain 3D Printer Model

Author: @
License: CC BY
File formats: scad,stl
Download type: zip
Size:140.1KB

The file 'Customizable Universal Phone & Tablet Stand With Keychain 3D Printer Model' is (scad,stl) file type, size is 140.1KB.

Summary

Holder/stand/dock for ipad, iphone, other tablets & smart phones, which allow viewing tablet / phone screen hand-free.

You can download and print directly. Or you can click on "Open in Customizer" to customize the model to your taste, before printing. You can change base width (for example, if you want wider based holder, and having more colored stripes), base length, device thickness (for example, to suit your thicker tablet), device inclination, dock thickness and, especially, you can also change the style by parameters X and Y. The length unit is millimeter, the angle unit is degree.

The default model was tested with iPhone 6 / iPhone 6s, iPhone 5 / iPhone 5s, iPad Air, iPad Air 2, Samsung Tab S, Sony Xperia, in landscape and portrait modes. The customized "strawberry", "orange" and "kiwi" are also tested with iPhone 6, iPad Air 2 and Samsung Tab S.

Printing time for default model with one colour should be less than 10 minutes.

To make multiple colored stripes, I paused the printing at the right layer, changed the filament with different color, then continued, then repeated again for other color(s). For example, if printing with 0.3mm layer thickness for default model, there would be 54 layers to be printed; I changed the filaments at the end of layer 18 and layer 36 to make three colored stripes.

Update: After the comments of users, I added:

  1. Optional ring for keychain
  2. Customizable thickness at the depression for hooking phone/tablet
  3. Customizable (optional) text on the bottom of the stand.
ipad.scad 1.9KB
ipad.stl 1.1MB
ipad_kiwi.stl 133.6KB
ipad_orange.stl 129.4KB
ipad_strawberry.stl 145.4KB