Hello Thingiverse members!
These are my Universal Connectors, part 2.
The first set of Universal Connectors was pretty rounded to connect round sticks and gadgets.
The first set of connectors can be found here: http://www.thingiverse.com/thing:1165439
This time, we have rectangle shapes which can be modified to fit your needs in the Customizer!
A few parameters to use:
1.) Outer width - how thick the connector wall will be (in mm)
2.) Hole width - hole size in mm.
3.) Connect length - the length of each connect (or "leg") in mm.
STLs attached are generated with following parameters:
Outer width = 12;
Hole width = 8;
Connect length = 20;
Feel free to comment, write suggestions or tips how to make it better.
Enjoy!
| I_Connector-rect.stl | 4.1KB | |
| LL_Connector-rect.stl | 10.0KB | |
| L_Connector-rect.stl | 7.2KB | |
| TT_Connector-rect.stl | 11.8KB | |
| T_Connector-rect.stl | 8.8KB | |
| Universal-connectors-rect-v1.scad | 11.1KB | |
| XT_Connector-rect.stl | 15.4KB | |
| XX_Connector-rect.stl | 18.6KB | |
| X_Connector-rect.stl | 12.3KB |
