Customizable Terminal Strip Cover 3D Printer Model
The file 'Customizable Terminal Strip Cover 3D Printer Model' is (stl,scad) file type, size is 521.5KB.
The file 'Customizable Terminal Strip Cover 3D Printer Model' is (stl,scad) file type, size is 521.5KB.
Customizable terminal strip cover.
New version 2 now works with customizer just click the link below.
https://www.thingiverse.com/apps/customizer/run?thing_id=2708367
or...... open in openscad
Instructions.................................
Download OpenScad from
http://www.openscad.org/downloads.html
Run the file....... Terminal_strip_cover.scad
Change parameters to suit your terminal block
Press F5 Please wait until it compiles the model
Press F6 to save STL file for printing.
The parameters below are for a standard 5 Amp terminal strip (see above photo)
// parameters ////
Num_of_terminals=4; /// [Default 2 .... range [2-12]]
wire_outter_dia=7.3; // [Default.... 7.3 ]
block_width=6.4;/////// [Default.... 6.4 ]
block_gap=3.1;///////// [Default.... 3.1 ]
block_height=13.0;///// [Default.... 13.0 ]
block_length=16;/////// [Default.... 16.0 ]
//please note a small change of the stretch parameter below makes a big difference to the model (eg. try changing 1.7 to 1.65 to see the result)
stretch=1.7;/////////// [Default.... 1.7]
////////// show ///////////////
show_parts=3; // [1= base only 2=cap only ]
num_of_tabs=2; //[0 1 2 default=2]
///////////////////////////////////////////////
// tab fixing hole ////////////////////////////
fixing_hole_size=4;//[default 4]
tab_width=12; //[ tab width default value bigger than block_length ]
chamfer=1; // [1=chamfer 0= no chamfer]
Please note
Intended for low voltage applications.
Use at own risk
| 2_way_Terminal_Cover_top.stl | 123.8KB | |
| 2_way_Terminal_strip_base.stl | 678.5KB | |
| 3_way_Terminal_cover_top.stl | 123.8KB | |
| 3_way_Terminal_strip_base.stl | 706.3KB | |
| 4_way_Terminal_cover.stl | 859.7KB | |
| 4_way_Terminal_cover_top.stl | 137.1KB | |
| 4_way_Terminal_strip_base.stl | 726.6KB | |
| 8_way_Terminal_cover_top.stl | 109.0KB | |
| 8_way_Terminal_strip_base.stl | 827.4KB | |
| New_V3_bottom.stl | 729.7KB | |
| New_V3_Top.stl | 136.4KB | |
| Terminal_strip_cover.scad | 6.8KB | |
| Terminal_strip_cover_v2.scad | 7.0KB | |
| Terminal_strip_cover_v3.scad | 7.5KB |
