Smarten up your desk with these natty tambour door boxes. The doors themselves are made up of individual jointed slats which are self-assembling (print in place), this makes for a very smooth and free moving door that rolls shut with a gentle nudge.
Open in the customizer to create boxes of any size or if you're handy with openSCAD there are many more parameters to configure in the source code box_customizer.scad.
Warning
The lip section is designed to clip into place and not be removable so do not press this into place until the door is installed and you're happy it opens and closes with ease.
All parts are oriented for printing, I print these without supports though this often requires a little filing around the inside of the opening.
| box_customizer.scad | 29.8KB | |
| box_small.stl | 230.2KB | |
| box_tall.stl | 241.3KB | |
| door_small.stl | 7.8MB | |
| door_tall.stl | 13.6MB | |
| lip_small.stl | 1.4MB | |
| lip_tall.stl | 1.4MB |
