Customizable Stackable Card Box For Boardgames 3D Printer Model
The file 'Customizable Stackable Card Box For Boardgames 3D Printer Model' is (stl,FCStd) file type, size is 399.0KB.
The file 'Customizable Stackable Card Box For Boardgames 3D Printer Model' is (stl,FCStd) file type, size is 399.0KB.
A universal deck box designed to store the playing cards in your favorite boardgames, and be used during gameplay to keep stuff nice and orderly. The boxes attach to each other top to bottom and side by side via magnets, stackable at any size.
An opening at the side makes the decks and single cards easily removable from the box.
The card boxes are highly customizable.
-Height
-Width
-Wall thickness
-Magnet size
-Corner size
can all be customized in the spreadsheet in the Freecad file.
Additional material necessary:
-24 magnets (3mm diameter, 2 mm height) or 12 (3x4mm) for each box.
-4 magnets (3mm diameter x 2mm height) for the lid.
-glue to attach the magnets to the boxes.
The size of the magnet holes may change depending on your printer, so do a test box first.
These boxes are part of an insert build for Dune: A game of Conquest and Diplomacy. I will probably upload the remainder once i am done with it.
I'd welcome any feedback. Please be nice, this is my first upload.
| CardBoxRelease1-Base.stl | 459.3KB | |
| CardBoxRelease1-Lid.stl | 181.5KB | |
| CardBoxRelease1.FCStd | 293.0KB |
