Customizable Soprano Ukulele 2.0 3D Printer Model
The file 'Customizable Soprano Ukulele 2.0 3D Printer Model' is (stl) file type, size is 6.9MB.
The file 'Customizable Soprano Ukulele 2.0 3D Printer Model' is (stl) file type, size is 6.9MB.
This is a Soprano ukulele I designed to be easy to print and assemble. No glue required for easy repair. This is an upgraded version that uses a shorter 250mm steel rod. I adjusted the sound hole and bridge placement for a louder and less muddy sound.
I have two versions of each ukulele.
Reg for calibrated printers and tolerance is for uncalibrated printers .
I suggest you calibrate your printer before printing. Another thing you can do is print both nuts and insert the steel rod to see which version will work best for your printer.
I had to remove the uke body. I need to modify and repair that model before I can re-upload that one.
Parts list:
1 x Neck1 x body1 x nut1 x bridge1 x 6mm x 250mm steel rod1 x M3 x 16mm screw bolt1 x M4 x 16mm screw bolt4 x M1.7*6 self tapping screws1 set of ukulele tuning pegs with screws ( I recommend this: https://www.amazon.com/dp/B00EQ2ABD4 Not an affiliate link)Instructions to create are found on V1
| bridge_new.stl | 81.9KB | |
| chromatic_neck_new_reg.stl | 2.1MB | |
| Chromatic_neck_new_tolerance.stl | 2.1MB | |
| model_balalaika_new_reg.stl | 1.3MB | |
| Model_balalaika_new_tolerance.stl | 1.3MB | |
| model_cigarbox_new_reg.stl | 1.4MB | |
| Model_cigarbox_new_tolerance.stl | 1.4MB | |
| model_circle_new_reg.stl | 1.4MB | |
| Model_circle_new_tolerance.stl | 1.4MB | |
| model_drop_new_reg.stl | 1.4MB | |
| Model_drop_new_tolerance.stl | 1.4MB | |
| model_v_new_reg.stl | 1.2MB | |
| model_v_new_tolerance.stl | 1.2MB | |
| nut_new_reg.stl | 101.8KB | |
| Nut_new_tolerance.stl | 102.6KB |
