Print your own softbox for a NeoPixel (WS2812) matrix to build e.g. a tetris display.
Note: There are many manufacturers with different mechanical ring sizes. So use the customizer (or OpenSCAD direct) to adapt to your matrix and design.
Optimized for single extruder 3D printer. Print from LED-mount up or down - both possible without support material.
For more and diffuse light paint inside with silver or white ink.
As diffusor in front you can use a sheet of paper or an opal acryl.
The example stl-file is for the "Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix"
| Matrix8x8.stl | 4.9MB | |
| SoftBoxNeoPixelMatrix01.scad | 3.4KB |
