The file 'Customizable Sliding Puzzle (print In Place) 3D Printer Model' is (scad,stl) file type, size is 24.2MB.
/! to be printed lying on it's flat side
A simple sliding puzzle. One side is always unsolved so you can just turn it around instead of having to scramble it (which you still can of course). You are able to make your own by using the included files: either without front (only the scrambled numbers on the back side) or customize both sides on the completely clear file.
Update (19.05.2022): New OpenSCAD file added: tolerances and size are now customizable
Update (28.04.2022): Additional Files with 0,2mm tolerance added.
Update (20.04.2022): Additional Files with 0,4mm tolerance added. Should be easier to break free after printing but might get too loose over time.
sliding_puzzle.scad | 4.8KB | |
Sliding_Puzzle.stl | 10.3MB | |
Sliding_Puzzle_0.2mm_tol.stl | 10.6MB | |
Sliding_Puzzle_0.4mm_tol.stl | 10.3MB | |
Sliding_Puzzle_clear.stl | 4.4MB | |
Sliding_Puzzle_clear_0.2mm_tol.stl | 4.4MB | |
Sliding_Puzzle_clear_0.4mm_tol.stl | 4.4MB | |
Sliding_Puzzle_no_front.stl | 7.4MB | |
Sliding_Puzzle_no_front_0.2mm_tol.stl | 7.4MB | |
Sliding_Puzzle_no_front_0.4mm_tol.stl | 7.4MB |