Modificación de https://www.thingiverse.com/thing:3612377 para almacenar memorias SD y MicroSD.
Las memorias están alineadas en la parte superior para que no se salgan si se voltea el contenedor.
Para tapar los contenedores se puede usar una tapa de una lata Pringles o imprimirla desde el proyecto original.
Para personalizar el resultado se debe abrir el archivo joaquinfq/openscad/Storage/Pringles/memory.scad dentro de Storage.Pringles.memory.scad.zip y modificarlo.
NOTA: Requiere OpenSCAD 2016.X.X o una versión más reciente.Remixed from https://www.thingiverse.com/thing:3612377 for storing SD and MicroSD memories.
The memories are aligned at the top so that they do not come out if the container is turned over.
To cover the containers you can use a lid of a Pringles can or print it from the original project.
To customize the result, open the file joaquinfq/openscad/Storage/Pringles/memory.scad inside Storage.Pringles.memory.scad.zip and modify it.
NOTE: Require OpenSCAD 2016.X.X or newer.https://gitlab.com/joaquinfq/openscad/blob/master/Storage/Pringles/memory.scad
| Pringles-memory01xSD--58xMicroSD.stl | 38.5MB | |
| Pringles-memory02xSD--55xMicroSD.stl | 38.4MB | |
| Pringles-memory04xSD--51xMicroSD.stl | 38.4MB | |
| Pringles-memory06xSD--43xMicroSD.stl | 38.4MB | |
| Pringles-memory08xSD--38xMicroSD.stl | 38.4MB | |
| Pringles-memory08xSD--41xMicroSD.stl | 38.4MB | |
| Pringles-memory10xSD--33xMicroSD.stl | 38.4MB | |
| Pringles-memory12xSD--27xMicroSD.stl | 38.4MB | |
| Pringles-memory12xSD--28xMicroSD.stl | 38.4MB | |
| Pringles-memory13xSD--28xMicroSD.stl | 38.4MB | |
| Pringles-memory14xSD--18xMicroSD.stl | 38.4MB | |
| Pringles-memory16xSD--14xMicroSD.stl | 38.4MB | |
| Pringles-memory16xSD--17xMicroSD.stl | 38.4MB | |
| Pringles-memory18xSD--10xMicroSD.stl | 38.4MB | |
| Pringles-memory20xSD--6xMicroSD.stl | 38.4MB | |
| Pringles-memory21xSD--1xMicroSD.stl | 38.4MB | |
| Pringles-memory22xSD.stl | 34.9MB | |
| Pringles-memory55xMicroSD.stl | 36.5MB | |
| Pringles-memory61xMicroSD.stl | 36.5MB |
